Resetting The Factory Default Settings - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Menu settings continued
Restoring the factory default settings
This function resets all previously changed
values to their original factory settings.
The following settings and stored values are
affected:
Water hardness
Programming of cup filling level
Ground coffee quantity to cup filling level
setting
Coffee temperature
Shut-off time
Heating system
Settings for coffee filling quantity, coffee-
milk proportion and froth quantity for milk -
based coffee.
To restore the coffee machine to the factory
settings, proceed as follows:
Press the e menu button. The following
appears on the display:
Lir5
6 6
6 6
+ OK
Press the (C) button until the "Device
parameters" menu appears for selection.
The following appears on the display:
4
6
4 6
OK
-Po
Press the® button to select the "Device
parameters".
28
Press the (C) button until the "RESET"
menu appears for selection. The following
appears on the display:
RESET
411-
OK
-110
Press the ()button to perform a "Reset".
The coffee machine is reset. The following
appears on the display:
RESET
After programming, the display automatically
returns to the "Reset" menu item.
To return to coffee mode, press the
8 menu button twice or wait approx. 30
seconds until the coffee machine switches
back to coffee mode.