Connecting The Milk System - Sunbeam EM9300 Caffe Bellissimo Instruction Booklet

Preparing your Sunbeam Caffe Bellissimo continued
Fit the lid (a) of the coffee holder by
inserting the hinge into the holder from
above. Refer to Figure 3.
Filling the coffee bean container
Caution:
Make sure that no foreign objects such as
stones get into the coffee bean container.
This will damage your espresso machine.
Fill the coffee bean container only with
coffee beans without sugar coatings or
aromatised constituents.
To fill the coffee bean container:
Fold back the lid of the bean hopper.
Fill the container with fresh coffee beans.
Then close the container again.
10
Connecting the milk system
The milk system must be connected in order
to dispense milk-based coffees.
Press the left side of the door with the
coffee dispensing unit to open it.
See Figure 4.
Figure 4
nsert the cut end of the milk tube into
the opening on the upper left of the milk
container. See Figure 5.
Put the tapered end through the opening
on the side towards the outside and place
the milk tube into the guide.
See Figure 6.