Half Space; Adding A Character; Removing A Character - Smith Corona Spellmate 500 User Manual

Adding Another
Character
Find
Quick brwn fox
Erase
Quick brwn fox
Back Space
Quick brwn fox
Correct
brown
Quick brwn fox
Removing Another
Character
Find
Quick broown fox
Erase
Quick broown
Correct
Quick broown brown
20

Half Space

The Half Space feature is used when making
corrections when you omit a character or type one too
many. When the Half Space feature is activated, the
typing position moves a half space to the right.
Regular spacing returns when the Half Space feature
is deactivated.
NOTE: When you activate the Half Space feature, the
character Correction Memory is erased. The typewriter
remembers the half spaced characters until the Half Space
feature is deactivated. Then, the typewriter begins to
remember normally spaced characters again.

Adding a Character

1. Press Correct or WordEraser to erase error.
2. Press Backspace to position the carrier one space
before the first character of the erased word.
3. Press Code + Halfspace (Spacebar). Print hammer
advances a half space.
4. Type correct word.
5. Press Code + Halfspace (Spacebar).

Removing a Character

1. Press Correct or WordEraser to erase error.
2. Press Code + Halfspace (Spacebar). Print hammer
advances a half space.
3. Type the correct word.
4. Press Code + Halfspace (Spacebar).
fox
NOTE: Before activating the Half Space feature on another
line, you have to remove the error using off-line correction
fox
procedures. (See "Off-Line Correction.")
Smith Corona Corporation