Specifications - Canon CanoScan LiDe 50 Quick Start Manual

Specifications

Scanner Type
Scanning Element
Light Source
Optical Resolution
Selectable Resolution
Scanning Bit Depth
Scanning Speed *1
(Photo or Document)
Preview Speed *2
Interface
Maximum Document Size
Scanner Buttons
Operating Range
Power Requirements
Power Consumption
Maximum Exterior Dimensions
Weight
*1 USB 2.0 Hi-Speed mode. Transfer time to computer is not included.
*2 Calibration processing time is not included.
• Specifications are subject to change without notice.
• Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall
ScanGear CS and CanoScan Toolbox using the "Uninstall the Software" menu of the
CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows
XP with these programs still installed. After upgrading to Windows XP, reinstall
ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please
read the "Troubleshooting" section of the Scanning Guide (HTML format manual).
Color
Grayscale
Color
Grayscale, B&W
Temperature
Humidity
CanoScan LiDE 50
CIS (Contact Image Sensor)
3-color (RGB) LED
1200 x 2400 dpi
25 - 9600 dpi (ScanGear CS)
16 bit input / 16 bit or 8 bit output for each color (RGB)
16 bit input / 8 bit output
6.4 msec./line (600 dpi), 12.7 msec./line (1200 dpi)
3.1 msec./line (600 dpi), 4.2 msec./line (1200 dpi)
Approximately 9 sec.
USB 2.0 Hi-Speed,
USB 2.0 Full Speed (USB 1.1 equivalent)
A4/Letter: 216 x 297 mm (8.5 x 11.7 in.)
4 buttons: COPY, SCAN, FILE, E-MAIL
°
5 C to 35
10% to 90% RH (without condensation formation)
Supplied via USB port
In operation: 2.5 watts maximum, Stand-by: 1.5 watts
258 x 374 x 38 mm (10.1 x 14.7 x 1.5 in.)
Approximately 1.8 kg (4.0 lbs.)
Flatbed
° ° °
C (41 F to 95 F)