Table of Contents
Advertisement
SCSI Speed
Jum~ers
Figure 5–
11.
Component Locations
System EEPROM
When replacing a processor board, remove the EEPROM from the failed proces-
sor board and install it in the new/exchange processor board, as shown in
Figure 5 – 11. Remove the EEPROM from the new processor and place it into the
de~ectiveprocessor. (This is required for the board test/repair process.)
NOTICE:
CAUTION:
The EEPROM on the processor board stores the 1/0
configuration information. To retain this information
when you replace a processor board. move the origi-
nal EEPROM to the new processor board.
Use an anti– static strap to prevent electrostatic dam-
age to the EEPROM. Electrostatic damage can de-
stroy the EEPROM or erase configuration informat-
ion from the EEPROM.
Field Replaceable Units
5–13
Advertisement
Table of Contents
