HP Model 712/100 - Workstation Handbook page 56

Setting the Monitor Type from the Boot Administration Mode
Use this method to change the workstation's graphics parameters before you replace
the monitor.
1.
Enter the Boot Administation Mode as described in the section "Entering the
Boot Administration Mode" in Chapter 4.
2.
Enter the following command to display the current monitor configuration for
the system:
BOOT_ADMIN> monitor
The screen displays the available options and the current monitor configura-
tion, similar to the following:
Monitor Choices
Type Resolution
–––– ––––––––––
1 1280x1024
2 1024x768
3 1024x768
4 1024x768
5 1280x1024
6 1024x768
7 640x480
8 1280x1024
9 1024x768
10 800x600
11 640x480
12 1280x1024
13 1280x1024
Current Monitor Type is
2 1024x768
BOOT_ADMIN>
3.
To change the monitor configuration of the system, type the following:
BOOT_ADMIN> monitor type
where type is the number in the Type column. For example, to select monitor
Type 1 Resolution 1280x1024 Frequency 72Hz, type the following:
BOOT_ADMIN> monitor 1
3–16 Configuration
Enter
Frequency
–––––––––
72Hz
75Hz
70Hz
72Hz Flat Panel
60Hz
60Hz
60Hz
75Hz VESA
75Hz VESA
75Hz VESA
75Hz VESA
72Hz Greyscale
50Hz
72Hz
Enter
Enter