Adding Pictures - HP Media Center m7200 - Desktop PC Software Manual

106
HP Media Center PC Software Guide
c
Use the magicMoment controls to mark
video scenes to include and exclude:
Click and hold down the green
■
thumbs-up button to mark scenes that
must be included in the movie.
Click and hold down the red thumbs-
■
down button to mark scenes that must
be left out of the movie.
Click or hold down the gray thumb
■
button to undo 1 second of a selected
scene. Press the Shift key on the
keyboard, and then click the scene to
undo scenes that were marked with the
thumbs-up or thumbs-down buttons.

Adding pictures

To add still image files to your movie production:
1
Select the Add Pictures button in
the Video/Pictures area. The Add
Pictures window opens.
2
Browse the folders on your hard disk drive to
select existing still image files for your movie:
Add up to 50 .jpg, .gif, or .bmp
■
picture files.
Select multiple picture files by pressing and
■
holding Ctrl on your keyboard while
selecting the files.
Click or hold down the arrow buttons
■
to navigate backward and forward
through the video footage.
Video footage left unmarked is still analyzed
when you make the movie and may be
included in the final version of the movie.
For best results with the production of your
movie:
Keep each magicMoment to less than
■
10 seconds.
Keep the total duration of
■
magicMoments to less than 50 percent
of the duration of your movie. It is
recommended to select only a few
scenes.
d
Click OK when you finish marking scenes.
The window closes. Note that the video
clip is marked on the lower-left side.
3
Adjust the order of the picture files by
selecting and then dragging and dropping the
picture file. Select the picture, and click the
Trash Can icon to remove a picture from the
production.
4
Select the Rotate Image
Clockwise button to rotate still
images.