Advertisement
T
R
OOLS
EQUIRED
In addition to the components listed above, you may need the following tools.
Please be sure you have everything you need before beginning the installation.
Phillips Screw Driver
Slotted Screw Driver
Electric Drill with 7/32" (5.5 mm) and 1/8" (3 mm) drill bits
T
I
YPICAL
NSTALLATIONS
The illustrations below show three typical installations: AC-powered, solar-
powered using the Timer, and solar-powered using the Alarm Output Module.
A list of steps for each installation type is provided.
AC-Powered
The illustration below shows an AC-powered station and cellular telephone
modem (CTM).
Cell Phone
Handset
You must complete the following steps for this installation.
1. Configure the CTM (see "Configuring The Cellular Telephone Modem" on page 8).
2. Install antenna (see "Installing Antenna" on page 11).
3. Install Radio Surge Protector (optional).
Consult the manual supplied with the Radio Protector for installation
instructions.
Page 4
CTM
Terminal
Block
Link Adapter
Console
Sensor
Interface
Module
CTM Power
Cable
Radio Surge Protector (optional)
To Antenna
Protector Ground
+12 V
Cellular Telephone Antenna Kit
AC-Power
Adapter
Advertisement
