Advertisement
On the other side of the terminal block, connect the black CTM power wire to ter-
minal 1 (grey), the green CTM power wire to terminal 3 (orange), and the red CTM
power wire to terminal 4 (orange).
The green wire will need to be moved to terminal 2 (green) after you
have tested the installation. Connecting the wire to terminal 3 bypasses
the "power-saver" mode and insures power is applied simultaneously to
the red and green CTM power wires.
Connect the white and black wires from the Timer to the Wht and Blk terminals
(respectively) at B4 on the regulator circuit.
Jumper together the two terminals (Yel and Grn) at B3 on the regulator circuit
using the jumper wire.
Page 18
Cellular Telephone Antenna Kit
Advertisement
