Advertisement
BNC Adapter
Power Adapter, 12V, 2A
Modem RF Cable, co-axial, BNC and Mini-UHF connectors, 12" (30 cm) long
CTM Power Cable, DB25 connector and cable
Modular Cable, 6-conductor, 4' (1.2m) long
Two Tab Adapters
Two Battery Wires (1 red, with in-line fuse holder, 1 black)
Three Alarm Output Module Wires (1 green, 1 yellow, 1 white)
Jumper Wire, yellow
Three #6 Sheet Metal Screws (for mounting modem bracket)
Two #8-32 x 3/4" Machine Screws, Washers, Lock Washers, and Nuts (for mount-
ing antenna)
Two Power Connector Brackets and #6 Screws
Two #4 x 3/8" Machine Screws and Two #4 x 3/4" Machine Screws, Washers, Star
Washers, and Nuts (for mounting hang-up cup)
Four #4 x 3/8" Machine Screws and Nuts (for mounting Timer on terminal plate)
Modem Configuration Disk
Motorola SMCT2 Cellular Telephone Modem Components
The Motorola SMCT2 CTM should include the following components, which
will be necessary for the installation.
Cellular telephone Modem (S5692A)
Mounting Bracket
4 Adhesive Pads
The CTM should also include a power cable, two wire/fuse loops, one black
wire, and a hardware package, none of which is needed.
Page 2
Mounting Bracket
and Adhesive Pads
Cellular Telephone
Modem
Cellular Telephone Antenna Kit
Advertisement
