Advertisement
6. Connect the WeatherLink cable to the L1 connector on the WeatherLink Radio/SRMo-
dem Adapter.
7. Connect the free end of the modem RF cable to the BNC adapter or the EQUIPMENT
side of the Radio Surge Protector.
8. Connect the antenna cable to the BNC adapter or the ANTENNA side of the Radio
Surge Protector (routing the antenna cable through one of the strain reliefs at the
bottom of the shelter, if using the shelter).
WeatherLink
Radio/SR Modem
Adapter
From WeatherLink
Page 14
Modem
(CTM)
Modem RF
Cable
WeatherLink
Data Logger
Console Base
BNC Adapter
Antenna
Cable
OR
Surge
Protector
(optional)
Cellular Telephone Antenna Kit
Advertisement
