Advertisement
Use the following steps to finish the installation.
87,21
It is not necessary to enter a code in order to perform this test. DO NOT ENTER A
CODE UNTIL YOU READ THE USER'S MANUAL.
Insert the battery into the DriveRight console as shown below.
The screen you should see is the current readings screen. The word "BAT"
should appear in the lower left corner, indicating that the unit is operating on
battery power.
!
Press and hold
appears.
If you have already used the console, you may see the tamper time screen
instead. If so press
With the ignition off, connect the adapter cable to the console cable.
!
It is easiest to make the connection by first holding the adapter cable by the
connector housing and holding the console cable by the cable itself next to
the sliding connector housing.
Indicates Unit Running on Battery Power
for 3-5 seconds until the last correct code screen
once to display the last correct code screen.
Figure 1: Last Correct Code Screen
Advertisement
