Advertisement
The following information is provided as a clarification to the 9600 Fire Alarm Control Panel
manual.
1. PAS (Positive Alarm Sequence) programming feature. Refer to the 9600 manual page 47 and
page 114 for information on this option.
The PAS option is not available in the initial release of the 9600 software. Do not attempt to use this feature since it
is not yet functional in this product. Information on the availability of this feature will be made known on the
manufacturer's internet site along with details on how to upgrade existing software.
2. Printer Supervision. Refer to the 9600 manual page 92 for information on this option.
Printer supervision, when enabled, will typically detect the removal of the printer cable and will detect when the
printer power has been turned off. Depending upon the brand of printer, other errors such as paper empty or printer
off-line may be detected.
Doc. # 51583 Rev. B 05/07/01 ECN 01-131
Page 5 of 5
Advertisement
