Table of Contents
Advertisement
Instructions for use
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
• If the fault code E10, E20 or E40 is shown in
the multidisplay, you may be able to remedy
the fault yourself (see Faults Table below). Af-
ter remedying the fault, press the button START/PAUSE (START/
PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform
Customer Service.
• In the case of all other displayed faults (E and number or letter),
please inform the Customer Service and state the fault code.
The machine does not
work.
The door will not close.
Error code
pears. The MAIN WASH
(HOOFDWAS, LAVAGE)
indicator flashes.
32
Fault
The plug is not in the socket. Insert the plug.
The fuse or protection device
has tripped.
The machine door was not
closed properly.
The START/PAUSE (START/
PAUZE, MARCHE/PAUSE)
button was not pressed long
enough.
The child safety device has
been set.
E40
ap-
The door is not closed
properly.
Possible Cause
Remedy
Replace/reset the fuse.
Close the door. You should
hear the door engage.
Press the START/PAUSE
(START/PAUZE, MARCHE/
PAUSE) until the Programme
begins.
Release the child safety de-
vice (see "Childsafety de-
vice").
Close the door properly.
Start the programme again.
Advertisement
Table of Contents
