Brother DCP-J125 Basic User's Manual page 60

PhotoCapture Center
Difficulty
Removable Disk does not work
properly.
Cannot access Removable Disk
from Desktop icon.
Part of my photo is missing when
printed.
46
®
Difficulties
Suggestions
1 Have you installed the Windows
1) Unplug the USB cable.
2) Install the Windows
 Install MFL-Pro Suite from the Installation CD-ROM. (See the Quick
Setup Guide.)
 Download the latest service pack from the Microsoft Web site.
3) Wait about 1 minute after you restart the PC, and then connect the USB
cable.
2 Take out the memory card and put it back in again.
3 If you have tried "Eject" from within Windows
before you continue.
4 If an error message appears when you try to eject the memory card, it means
the card is being accessed. Wait a while and then try again.
5 If all of the above do not work, turn off your PC and machine, and then turn
them on again. (You will have to unplug the power cord of the machine to turn
it off.)
Make sure that you have correctly inserted the memory card.
Make sure that Borderless Printing and Cropping are turned off. (See Borderless
printing in chapter 4 and Cropping in chapter 4 of the Advanced User's Guide.)
®
2000 update? If not, do the following:
®
2000 update using one of the following methods.
®
, take out the memory card