A Routine Maintenance; Replacing The Ink Cartridges - Brother DCP-J125 Basic User's Manual

Hide thumbs Also See for DCP-J125:
Table of Contents

Advertisement

A
Routine maintenance
Replacing the ink
cartridges
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you to replace
an ink cartridge, there will be a small amount
of ink left in the ink cartridge. It is necessary
to keep some ink in the ink cartridge to
prevent air from drying out and damaging the
print head assembly.
IMPORTANT
Brother strongly recommends that you do
not refill the ink cartridges provided with
your machine. We also strongly
recommend that you continue to use only
Genuine Brother Brand replacement ink
cartridges. Use or attempted use of
potentially incompatible ink and/or
cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or
cartridges. To protect your investment and
obtain premium performance from the
Brother machine, we strongly recommend
the use of Genuine Brother Supplies.
32
a
Open the ink cartridge cover.
If one or more ink cartridges have
reached the end of their life, the LCD
A
shows B&W Print Only or
Cannot Print.
b
Press the lock release lever as shown to
release the cartridge for the color
indicated on the LCD. Remove the
cartridge from the machine.
c
Open the new ink cartridge bag for the
color shown on the LCD, and then take
out the ink cartridge.
A

Advertisement

Table of Contents
loading

Table of Contents