Citizen BD2-2880 User Manual page 35

ESC ! n
Collective Specifying Printing Mode
[Function]
[Code] <1B>H<21>H<n>
[Range] {0 =< n=< FF} Data is described in Hex code.
[Outline] Printing mode is assigned. Each n bit indicates the following:
Bit
0
1
2
3
4
5
6
7
• With double height and double width being specified simultaneously, double wide and
[Caution]
double high characters are consisted.
• An underline is attached to the full character width, which, however, is not attached to
the part having been skipped by the horizontal tab.
Neither is it attached to 90°-right-turned characters.
• The underline width is as having been specified by <ESC ->.
(The default setting is 1 dot width. )
• Specification with this command is invalid to Kanji, except specification and cancellation
of highlighting
• In case that double wide character and normal character exist in same one line, the layout
of underline is consistent one.
[Default] n = 0
ESC E,ESC
[See Also]
Function
Character Font
Undefined
Undefined
High-lighting
Double height
Double width
Undefined
Underline
–
Va lue
0
Font A
Canceled
Canceled
Canceled
Canceled
31
BD2-2880/2890 User's Manual
1
Font B
Specified
Specified
Specified
Specified