Table of Contents
Advertisement
Problem
The END (FIN/EINDE)
indicator flashes
8 times.
The washing machine
vibrates when operat-
ing or is noisy.
The main wash deter-
gent solution produces
too many suds.
Possible Cause
The programme selector has
not clicked into place cor-
rectly.
The transit bolt/bars were
not removed.
The height-adjustable screw
feet have not been set
correctly.
There is very little washing in
the drum (for example, only
one bathrobe).
Water could not be drained
completely before spinning,
because the outlet hose has
got a kink in it or the drain
pump is blocked.
Probably too much detergent
was used.
Instructions for use
Remedy
First turn the programme se-
lector to OFF (ARRET/UIT),
then set the desired pro-
gramme to the exact posi-
tion.
Remove the transit bolts/bars
as described in the
Installation and Connection
instructions.
Adjust the screw feet as de-
scribed in the Installation
and Connection instructions.
Operation is not affected by
this.
Check the positioning of the
outlet hose and even out any
kinks if necessary or clean
the drain pump and remove
any foreign matter that
might be in the pump hous-
ing.
Follow the manufacturer's
instructions exactly, when
measuring out detergent.
31
Advertisement
Table of Contents
