Alpine VPA-B211A Owner's Manual page 24

1 CAMERA Input Terminal
Use when connecting a back-up camera.
2 AUX Input Terminals
If these terminals are connected to the optional
expansion box (VPE-S431), the AUX input
terminals are not used on this unit. Connect AUX IN
1, 2 and 3, and the AUX OUT 1 and 2 terminals of
the extension box (VPE-S431) to the external
device(s).
3 AV Select Connector
When this connector is connected to the optional
expansion box (VPE-S431), connect this to the
HEAD UNIT terminal of VPE-S431.
4 RGB Input Terminal
Connect this to the RGB output terminal of the
Navigation System.
5 RGB Output Terminal
Connect a 13P RGB terminal equipped monitor
13P RGB terminal using the RGB cable supplied
with the unit.
6 Ai-NET Connector
Connect this to the output connector of other
product equipped with Ai-NET.
1
2
3
4
5
6
7
8
9
7 AUX Video/Audio Output Terminal
To output Video/Audio to the external front monitor.
8 Navigation Guide Output Terminal
Output navigation sound is monaural. Connect this
to the audio output (left) of the connected device.
9 Remote Control Eye Jack
Connect this to the remote control sensor unit.
• Removing the cover to use the AV SELECTOR terminal.
23
-EN