Table of Contents
Advertisement
Foreign Objects
Take care to ensure that metal or combustible objects are not inserted into
the openings of the Data Collector. Such objects create the danger of fire
and electric shock.
Location
Do not locate the Data Collector on a surface that is unstable or uneven. Doing so
creates the danger of the Data Collector falling, which can cause personal injury.
Do not locate the Data Collector in an area subject to large amounts of
humidity or dust. Doing so creates the danger of fire and electric shock.
Do not leave the Data Collector for long periods in a car parked in direct sunlight.
Heavy Objects
Never place heavy objects on top of the Data Collector. Doing so creates the
danger of loss of balance and the object falling, which can cause personal
injury.
LCD Screen
Never apply strong pressure to the screen or subject it to strong impact.
Doing so can crack the screen or LCD panel glass, which can cause the
danger of personal injury.
Should the LCD panel glass break, never touch the liquid inside. Doing so
can cause skin inflammation.
• Should liquid from the LCD panel accidentally get into your mouth,
immediately wash your mouth with water and then consult a physician.
• Should liquid from the LCD panel accidentally get into your eyes or onto
your skin, immediately rinse for at least 15 minutes with clean tap water
and then consult a physician.
Printer
Do not touch the gears while they are turning. Doing so can cause injury.
Battery Handling
Misuse of batteries can cause them to leak, which damages and corrodes
the area around the battery, and creates the danger of fire and personal
injury. Be sure to observe the following precautions.
• When loading batteries, make sure that their positive (+) and negative (–)
poles are facing the correct directions.
• Use only battery types that are specified for the Data Collector.
If you do not plan to use the Data Collector for a long time, protect against
rundown of the lithium backup battery by loading a fully charged lithium-ion
battery pack into the Data Collector. You should also load a fully charged
lithium-ion battery pack into the Data Collector before using it for the first
time following a long period of non-use.
Caution!
E-7
Advertisement
Table of Contents
