About The Timbre Type; Channel Aftertouch; Pitch Bend - Casio CTK-2000 Implementation Manual

Receive
Receipt of this message changes the tone of the part that corresponds to the MIDI channel.
The selected tone is determined by the program value of this message and the Bank Select message value received prior
to this message.
Also note that receipt of this message also may change the Timbre Type that corresponds to the selected tone. For more
information, see "11.1 About the Timbre Type" below.
11.1

About the Timbre Type

Tones that are selected by each Instrument part have an attribute that depends on the sound source operation type. This
attribute is called the "timbre type," which is one of the types described below.
Melody
•
This timbre type optimizes for normal melody tones.
Drum
•
This setting optimizes for drum sounds. The damper pedal does not function. The Hold1, Channel Coarse Tune,
and Master Coarse Tune messages are ignored if they are received.
12

Channel Aftertouch

Format
Message Format: DnH vvH
n: MIDI Channel Number
vv: Value
Send
These messages are never sent.
Receive
Receipt of this message adds modulation to the voice that is sounding. The modulation effect differs according to the tone
being used.
13

Pitch Bend

Format
Message Format: EnH llH mmH
n: MIDI Channel Number
ll: Value LSB
mm: Value MSB
Send
Sent when a pitch bender operation is performed on the CTK-3000.
Receive
Receipt changes the pitch of the currently sounding note. The range of the pitch change depends on the Bend Range value
setting.
15