Troubleshooting; Troubleshooting/Technical Specification - Bush BR20DAB Instruction Manual

BR20DAB
Troubleshooting / Technical Specification

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult you retailer or service
center.
WARNING: Under no circumstances should you try to repair the set yourself, as this would
invalidate the guarantee.
PROBLEM
No sound
Button functions are not
responding
Poor radio reception
Technical Specification
Power requirement
Max Power Consumption
Speaker Power Output
10% THD Power Output
DAB+ section
FM section
CAUSE
• Volume not adjusted.
• Headphones are connected.
• Main power cord is not
connected correctly.
• Electrostatic discharge.
• Weak radio aerial signal.
This may be caused by
electrical interference from
electrical equipment like TVs,
video recorders, computer,
etc.
18
SOLUTION
• Turn up the Volume.
• Disconnect the headphones.
• Connect the mains power
cord firmly into the AC/DC
socket of wall outlet.
• Turn off the unit, disconnect
the mains power cord,
reconnect after a few
seconds and turn the unit on
again.
• Re-position the radio & aerial
for best reception.
• Extend the antenna rod to
full length.
• Move the unit away from
other electrical equipment.
AC Input 230 V 50Hz
DC 9V, "C" (UM-2) X 6 battery
13W
1.2W
1W
174 MHz to 240 MHz
87.5 MHz to 108 MHz