Bush BR20DAB Instruction Manual page 11

BR20DAB
Daily Use DAB+
Changing the DAB+ Station Information
It is possible to change the information displayed on the second line of the display
when listening to a DAB+ station. There are nine types of information available as
listed below with examples to the right.
Dynamic Label Segment (DLS) - This is scrolling text
1
information supplied by the DAB+ station. It may
comprise information on music titles or details of the
programme.
Signal Bar - Shows the transmission signal level.
2
Program Type (PTY) - This is a description of the
3
type of programme provided by the DAB+ station.
Multiplex Name - This will show the multiplex that is
4
broadcasting the programme you are listening to.
Channel and Frequency - This displays the channel
5
number and the transmission frequency.
Signal Error Rate - If the transmission signal contains
6
any errors, the system will apply corrections.
The amount of signal corrections can be displayed as
a numerical value between 0 and 99. As the value
increases, you will hear the signal degrade.
To improve reception, try adjusting the position of the
antenna. Please note a signal error rate of 30 or more
will make the station inaudible.
Signal Information - This shows the digital bit-rate
7
and the signal mode.
Time - This shows the current time provided by the
8
broadcaster.
Date - This displays the date provided by the
9
broadcaster.
11
Press DISPLAY Button
ABC National
DLS scrolling
Press DISPLAY Button
ABC National
Press DISPLAY Button
ABC National
News
Press DISPLAY Button
ABC National
ABC DAB+
Press DISPLAY Button
ABC National
11C 220.352MHz
Press DISPLAY Button
ABC National
Signal error 1
Press DISPLAY Button
ABC National
80kbps Mono
Press DISPLAY Button
ABC National
12:38:33 AM
Press DISPLAY Button
ABC National
02/09/2009
Press DISPLAY Button