Picture And Sound Control Adjustment In The Pc Mode - Sansui LCDVD150 Owner's Manual

3. To connect the TV/DVD to a PC (Personal computer)
Before you connect this LCD Monitor to your PC, change the adjustment of your PC's Resolution and Refresh
rate (60Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the
VGA connector PC MONITOR at the back of the TV/DVD. Fix the connectors firmly with the screws on the plug.
In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia computer
and to the AUDIO L and R connectors of the AUDIO IN (LINE2) jacks of the TV/DVD.
Press INPUT SELECT on the remote control to select PC mode
Switch on the computer. The TV can be operated as the computer monitor.

Picture and sound control adjustment in the PC mode

NOTES:
• If you wish to change the on-screen
language, follow the steps 1 - 6 on page 16.
• If no buttons are pressed for more than
approx. 60 seconds, the PC Monitor Menu-
screen will return to normal Monitor-screen
automatically.
• The PC Monitor Menu settings are not
effective for normal TV-mode, DVD mode or
external input mode.
Monitor Display modes
MODE
VGA
SVGA
XGA
(not supplied)
PC Monitor Menu
There are a number of picture and audio settings you
can adjust to optimize the performance of the unit in
PC mode.
Press INPUT SELECT repeatedly to select PC mode.
Press TV MENU during PC mode.
The PC Monitor Menu will appear on the upper left of the TV-
screen.
Each time you press TV MENU, the PC Monitor Menu will
change as follows:
See next page for each setting option.
Resolution
640x480
800x600
1024x768
Normal
PC-screen
Menu 3
- +
BASS 0
- +
TREBLE 0
0 - +
BALANCE
Refresh rate
60Hz
60Hz
60Hz
Menu 1
-
0
BRIGHTNESS
C 0 -
ONTRAST
-
0
HOR POSITION
-
VER POSITION 0
-
PHASE 0
0 -
CLOCK
AUTO ADJUST
Menu 2
RED 0 -
GREEN 0 -
BLUE 0 -
+
+
+
+
+
+
+
+
+
47