Page 1
OWNER’S MANUAL 20” TFT LCD TV WITH DVD PLAYER LCDVD200 TV/CATV MODE SELECTION When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable Television) mode. If not using CATV, set this menu option to the "TV" position. ORION WEBSITE FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT...
Page 2
The lightning flash with arrowhead symbol, within an equilateral triangle is CAUTION intended to alert the user to the presence of uninsulated dangerous RISK OF ELECTRIC SHOCK DO NOT OPEN voltage within the product's enclosure that may be of sufficient mag- nitude to constitute a risk of electric shock.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4.
Page 4
IMPORTANT SAFEGUARDS (Continued) 12. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
Page 5
26. SOUND DISTORTION Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire. 27. HEADPHONES When you use the headphones, keep the volume at a moderate level. If you use the headphones continu- ously with high volume sound, it may cause hearing damage.
Features LCD color TV With DVD/CD player Unique space saving design combines a 20” LCD color TV and a DVD/CD player. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture/Audio quality of the DVD exceeds other software.
Contents Before using your unit IMPORTANT SAFEGUARDS ..........3 Features ................6 Contents ................7 Disc ..................8 Location of controls .............. 9 Remote control ..............11 To bundle the connected cable .......... 12 Power source ..............13 Antenna connections ............14 Cable TV connections ............
Disc Playable discs Disc type and logo mark content CAUTION: • Only the above types of discs can be played on this unit. Audio DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc. cannot be played. Video DVD Video • When you play an 8cm disc, please assemble it with an (moving off-the-shelf disc adapter before you insert it into the unit.
Location of controls CHANNEL UP/DOWN buttons POWER button VOLUME UP/DOWN buttons Front Remote sensor POWER indicator Left Side Right Side DISC slot PLAY button STOP button SKIP buttons Headphones jack 5 (EJECT) button AUDIO (L/R)/VIDEO IN (LINE 2 IN) jacks...
Page 10
Location of controls (continued) Rear Cable holder COAXIAL AUDIO (L/R)/VIDEO DIGITAL AUDIO RF IN jack IN (LINE 1 IN) jacks OUT jack S-VIDEO IN jack Variable TV-screen angle Approx. 15˚ 0˚ Approx. 5˚ You can adjust the angle of the TV-screen for 5˚ forward or for 15˚...
Remote control Page POWER Power On/Off 16,17,28,29,31 DISPLAY/CALL Call TV information Call DVD information TV/DVD Switch between TV/AV and DVD 28,29,37~42 5 (EJECT) Eject a disc 29,31,43 Direct channel selection of TV 17,21 Input setting 31~33 Enter a password 22,24,41~43 VOL +/–...
Remote control (continued) Inserting Batteries Open the battery compartment Install two "AAA" batteries Replace the compartment cover in the direction of the (supplied), paying attention to cover. arrow. the polarity diagram in the battery compartment. Operation • Aim the remote control at the remote sensor and press control buttons to operate.
Power source Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. AC Outlet Wider Hole and Blade Polarized AC Cord Plug (One blade is wider than the other.) NOTES: •...
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a cable TV service (CATV), see page 15 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination Antenna Antenna...
Cable TV connections This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Setting the on screen display language You can choose from three different languages (English, French and Spanish) for the on-screen displays. Adjustment menus and messages will appear in the language of your choice. On-screen language selection (step 5) will automatically appear on the screen when you press the TV MENU button initially.
TV operation To turn on the TV/DVD, press POWER. Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume VOLUME decreases, the number of green bars also decreases.
TV operation (continued) CHANNEL Press and release CH . The channel automatically stops at the next channel set into memory. For proper operation, before select- ing channels, they should be set into the memory. See pages 20 and 21 “To memorize channels” CALL Press DISPLAY/CALL to display the current information on the screen.
Closed caption WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the set- ting of the Closed Captions CH 1/2).
To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up to 113 Cable TV channels.
Page 21
AUTOMATIC MEMORY TUNING Press TV MENU in the TV mode. The TV menu screen will appear. Press until SET UP menu appears. TV/CATV CATV ADD/DELETE AUTO CH MEMORY < > /MENU Press to select the “AUTO CH MEMORY”, then press The TV will begin memorizing all the TV/CATV CATV...
Setting the V-Chip This TV/DVD is equipped with a V-Chip Controller which provides you with channel viewing access controls and restrictions. This function is to prevent your children from watching violence or sexual scenes, that you may choose to exclude. To use the V-Chip function, you must register a password.
Page 23
TO SET THE V-CHIP In the V-CHIP SET menu, press V-CHIP SET to select the “TV V-CHIP : OFF TV RATING : OFF RATING”. MOVIE RATING : OFF CHANGE PASSWORD < > /MENU Press to display the V-CHIP SET desired setting. V-CHIP : OFF TV RATING...
Setting the V-Chip (continued) TO CHANGE PASSWORD Press TV MENU in the TV mode. The TV menu screen will appear. Press until OPTION menu appears. V-CHIP SET LANGUAGE/IDIOMA/LANGUE < > /MENU Press to select the “V-CHIP SET”, then press V-CHIP SET LANGUAGE/IDIOMA/LANGUE <...
Picture control adjustment Picture controls are factory preset but you can adjust them individually as follows: Press TV MENU in the TV mode. The TV menu screen will appear. Press until PICTURE menu appears. BRIGHTNESS CONTRAST COLOR TINT SHARPNESS < >...
Stereo and second audio program (SAP) The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs with high fidelity stereo sound. MTS also provides an extra channel called the Second Audio Program or SAP which broadcasters can use to transmit a second language for bilingual transmission or for other purposes.
Sound control adjustment Sound controls are factory preset but you can adjust them individually as follows: Press TV MENU in the TV mode. The TV menu screen will appear. Press until the AUDIO menu appears. BASS TREBLE BALANCE SURROUND < >...
Preparation/Status display of disc Preparation The following pages describe the setup/operation in DVD mode. Before DVD/CD operation, please make preparations as follows. Insert the AC cord plug into a standard 120V 60Hz polarized AC outlet. • If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing POWER.
Playback procedure Press TV/DVD to select DVD mode. Place the disc in the disc slot with the label side facing forward. (If the disc has a label.) Hold the disc without touching either of its surfaces, align it with the guides, and place it in position. On the TV-screen, “No No Disc Disc”...
Special playback NOTE: There may be a slight delay be- Fast Forward Playback tween when you press the button and Press SEARCH during normal playback. the function activating. Each press of the SEARCH button will increase the speed of the search (x 2), (x 4), (x 8),...
MP3 playback This player can play back the MP3-data Insert a disc to play. which has been recorded on CD-R or CD- Place the disc in the disc slot RW. To produce the MP3-data, you need a with the label side to be played Windows-PC with a CD-ROM drive and MP3- facing frontwards.
Zooming/Locating desired scene Zooming This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the frame. Press ZOOM during play- back. The center part of the image will be zoomed in. Each press of ZOOM will change the ZOOM (x 2),...
Repeat/Random/Program playback and Repeat A-B Press PLAY MODE during playback or stop mode. Each time you press PLAY MODE, playback mode changes as follows. Audio CD/MP3 CD On screen On screen Operation Operation display display Title: Repeats the current title. All: Repeats entire disc.
Marking desired scenes The TV/DVD stores the points that you Marking the Scenes want to watch again. You can resume Press MARKER during playback from that scene. playback. Select the blank Marker using , then press ENTER at the desired scene.
Changing soundtrack language/Subtitles Changing soundtrack language You can select the language when you play a multilingual disc. Press AUDIO during play- back. 2/8 Fra Dolby Digital The current soundtrack language will appear. Press AUDIO repeatedly until the desired language 1/8 Eng Dolby Digital is selected.
Changing angles/Title selection/DVD menu Changing angles When playing back a disc recorded with multi-angle facil- ity, you can change the view angle. Press ANGLE during play- back. The current angle will ap- pear. Press ANGLE repeatedly until the desired angle is selected. Title selection Two or more titles are recorded on some discs.
Picture and sound control adjustment in the DVD mode Sound and picture control are factory Press TV/DVD to select BRIGHTNESS 0 preset but you can adjust then DVD mode. CONTRAST 32 - individually as follow: COLOR Press SETUP during TINT playback.
Setting language You can change the default settings Press TV/DVD to select Main Menu to customize performance to your DVD mode. Language preference. Press SETUP in the stop Picture mode or No Disc. Sound Press to select Parental “Language”, then press or ENTER.
Setting the aspect ratio of TV screen/Setting on screen display Setting the aspect ratio of TV screen You can select the aspect ratio for your TV. Press TV/DVD to select Main Menu DVD mode. Language Press SETUP in the stop Picture mode or No Disc.
Dynamic Range Control DRC (Dynamic Range Control) ena- Press TV/DVD to select Main Menu bles you to control the dynamic range DVD mode. Language so as to achieve a suitable sound for Press SETUP in the stop Picture your equipment. mode or No Disc.
Parental control setting Some discs are specified not suitable Press TV/DVD to select Main Menu for children. Such discs can be preven- DVD mode. Language ted from play back with the unit. Press SETUP in the stop Picture mode or No Disc. Sound Press to select...
To change the parental level Press TV/DVD to select DVD mode. Press SETUP in the stop mode or No Disc. Press to select “Parental”, then press ENTER. Press to select Parental “Password”, then press Password or ENTER. Parental Level Press Number buttons Password (0–9) to enter the password Password...
Temporary disabling of rating level by DVD disc Depending on the DVD disc, the disc Load a DVD disc (see page 29). may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.
Language code list Enter the appropriate code number for the initial settings “AUDIO”, “SUBTITLE” and/or “MENU LANGUAGE” (see page 38). Language Name Code Language Name Code Language Name Code Language Name Code Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919 Afar 1111 Finnish...
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend- ent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs. Using an AV Amplifier with built-in digital surround If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems including Dolby Digital Surround audio that sounds just like the movie.
Page 46
Connections to other equipment (continued) Using the audio/video inputs If you connect the TV/DVD to VCR, camcorder or TV game you can select by pressing INPUT SELECT. Press INPUT SELECT repeatedly to select the desired mode. “LINE1”, “LINE2” or TV channel will display on the screen. LINE1 LINE2 NOTE:...
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.
Problems and troubleshooting Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS PAGE POWER...
Page 49
SYMPTOMS POSSIBLE SOLUTIONS PAGE • No disc is inserted. Playback doesn’t start. • The disc may be dirty. Clean up the disc. • The unit cannot play CD-ROMs, etc. – No picture. • TV/DVD selector is not set correctly. • Check the input selector of the amplifier is set properly. –...
Specifications GENERAL Power supply: AC 120V 60Hz Power consumption: Operation: 70W Stand by: 2W Weight: 9.0 kg (19.8 lbs) Dimensions: Width : 594 mm (23-3/8 inches) Height : 436 mm (17-3/16 inches) Depth : 215 mm (8-7/16 inches) Operating temperature: 5 C - 40 C Operating humidity: Less than 80%...
limited WARRANTY COMBINATION 20” LCD COLOR TV/DVD PLAYER ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of ninety (90) days from date of original purchase in the United States only. Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first ninety (90) day period from date of original purchase, ORION will provide carry-in repair service at an ORION authorized Independent Service Center at no charge.
Need help?
Do you have a question about the LCDVD200 and is the answer not in the manual?
Questions and answers