Starting A Programme; Programme Progress; Interrupting A Programme/Adding Washing - AEG Electrolux LAVAMAT LAVALOGIC 1620 User Information

Starting a programme

1. Check that the water tap is
open.
2. Press the START key. The
wash cycle is started.

Programme progress

While the programme is
running, the display shows
among other things:
– each stage of the pro-
gramme as it progresses,
e.g. MAIN WASH,
– a bar showing the progress
of the programme,
– the expected residual moisture in the washing at the end of the pro-
gramme.

Interrupting a programme/Adding washing

Interrupting a programme
• The wash programme can be temporarily interrupted at any time by
pressing the PAUSE key. It is then re-started by pressing the key
again.
• To cancel a programme before it has finished, switch off the appli-
ance (press the control knob).
Adding washing
The padlock symbol in the display indicates whether washing can still
be added after the programme has started:
It is not possible to add washing (Door is locked because of high
water level or high temperature).
It is possible to add washing.
1. Press the PAUSE key. The
2. Open the door. Be cautious that any water in the drum may be hot and
there is a risk of scalding.
3. Add washing, close the door again.
4. Press the START key.
20
DELICATES 30°C
1000 RPM
START
30°
1000
OPTIONS
DELICATES 30°C
1000 RPM
PAUSE
###############=========]
1000
symbol appears in the display.
11:25-12:36
î
LINEN/EASY-C.
ENERGY SAVING
COTTONS
DELICATES)
WOOLLENS
11:25-12:36
§
MAIN WASH
MOISTURE 50 %