Setting The Delay Timer; Starting A Programme; Programme Progress - AEG Electrolux LAVAMAT 74800 User Information

Setting the delay timer

3
With the DELAY TIMER button you can postpone the start of a pro-
gramme by 30 minutes (30') to a maximum of 23 hours (23h).
1. Select programme.
2. Continue pressing the DELAY TIMER button until the desired start delay
is displayed in the multi-display, for example12h, if the start of the
programme is to be delayed by 12 hours. DELAY TIMER light is lit.
3
If the display is showing 23h and you press the button again, the time
delay will be cancelled. 0' appears followed by the duration of the set
wash programme.
3. To activate the time delay, press the START/PAUSE button. The remain-
ing time till the programme start is being shown (e. g. 12h, 11h, 10h, ...
'
30
etc.).

Starting a programme

1. Check that the tap is turned on.
2. Press the START/PAUSE button. The programme is started or starts after
the time delay set has elapsed.
3
If after the START/PAUSE button has been pressed E40 flashes in the
multi-display, the END indicator flashes 4 times and at the same time
an acoustic signal sounds 4 times, the door is not closed properly. Push
the door firmly closed and press the START/PAUSE button again.

Programme progress

• The programme progress display shows the programme step that is
currently being performed.
• The multi-display indicates the estimated time remaining (in minutes)
until the end of the programme.
3
During the washing cycle the remaining time may be increased or stay
the same for a while as the programme adjusts itself to different condi-
tions (e. g. type and quantity of laundry, out of balance spin detection,
special rinses, etc.).
15