Washing Cycle Complete/Removing The Washing - AEG Electrolux LAVAMAT LAVALOGIC 1620 User Information

Washing cycle complete/Removing the washing

At the end of the programme PLEASE TAKE OUT THE CLOTHES appears
in the display. As soon as the
opened.
1. Open the door using the handle.
2. Remove the washing.
3. Close the water tap.
4. Switch off the appliance.
If Rinse Hold has been selected:
1. Press the START key.
The display automatically
changes to the first pro-
gramme page. Depending
upon the programme that
has been running either SPIN
or SHORT SPIN is highlight-
ed.
If spinning or draining is required:
Use the control knob to
highlight either
– SPIN or
– DRAIN.
2. Reduce the spin speed, if
necessary. The spin speed
cannot be increased. This
protects the fabric.
3. Press the START key.
The washing is spun or the water is drained.
3
If OVERDOSING is shown in the display at the end of a wash cycle, too
much detergent was used in the completed wash programme. Please
take note of the dosage instructions provided by the detergent manu-
facturer and the amount of washing loaded the next time you wash.
§ symbol appears, the door can be
DELICATES 30°C
RINSE HOLD
START
######################
RINSE H.
SHORT SPIN
1200 RPM
START
1200
OPTIONS
SPIN
1200 RPM
START
1200
OPTIONS
11:28-11:28
§
RINSE HOLD
12:28-12:34
ú
EASY IRON
REFRESH
FASHION
SHORT SPIN)
SPIN
11:28-11:39
ú
FASHION
SHORT SPIN
SPIN)
STARCH
DRAIN
21