System Board Layout - HP Kayak XA 05xx Manual

System Board Layout

System Board Layout
The connector layout on the system board is the same for HP Kayak XA
Series 0503 and 0541 desktop and minitower models.
However, on the minitower models, there is one connector for the LCD
status panel and one for the MaxiLife LCD status panel, while on the
desktop models these options are combined into one connector.
Processor Fan
Single Slot 1
Processor
AGP Slot
PCI Slots
PCI/ISA Combination Slots
ISA Slot
Note: There are two internal fans for the Desktop model. One fan for the Processor, and the other
for the PCI (I/O Fan). Whereas for the Minitower model, there are three internal fans. One fan for
the hard disk drive, one for the PCI (I/O Fan), and the other for the processor.
10
Switches
Minitower MaxiLife
Status Panel
Power
LCD Status Panel
Floppy
Disk
External Battery
Drive
IDE 2 Connector
IDE 1 Connector
Buzzer
Desktop MaxiLife and
LCD Status Panel
Audio
Wake On LAN
I/O Fan
HP External Start
Fan Disk Drive
Memory Modules