Electrolux U312940. EFC70710 User Manual page 24

24 electrolux
Electrical Connection and Working
Test
Before fi tting the chimney to the
canopy make the electrical connection
as described in the section titled
EN
"ELECTRICAL CONNECTION".
When the electrical connection has been
made, test the three speed fan and
worktop illumination.
Fitting the Chimney Stack
The chimney consists of two sections.
The lower chimney measures 540mm
and the upper chimney (with the recir-
culation grilles on either side) measures
280mm. The overall installed measure-
ment is min. 630 - max 830mm.
Upper Chimney
To fi t the upper chimney section item 2.1
expand the chimney slightly to allow it to
be fi tted over the brackets item 7.2.1 as
illustrated.
When installed in the recirculation mode
ensure that the recirculation ducting ou-
tlet extension pieces item 14.1 align cor-
rectly with the outlet grilles in the chim-
ney.
Secure the sides of the chimney to the
brackets using the four screws item 12c
(2.9x9.5mm) provided, as illustrated.
Lower Chimney
To fi t the lower chimney section item 2.2
expand the chimney slightly to allow it to
be fi tted over the upper chimney item 2.1
and the hood body item 1 as illustrated.
Secure the sides of the chimney to the
hood body using the two screws item
12c (2.9x9.5mm) provided, as illustra-
ted.
Metal Extensions Installation
Insert the extensions item 3 to the glass
side, to tighten the screws Item 12a pro-
vided.
INSTALLING THE COOKER HOOD
3
12a
3