Lenovo ThinkCentre Edge 92z Hardware Maintenance Manual page 111

15. Remove the four screws that secure the chassis to the LCD panel, and then lift the chassis out of
the computer to get assess to the LCD panel.
Figure 46. Removing the four screws that secure the LCD panel
16. Place the computer chassis over the new LCD panel so that the four screw holes align with those in the
chassis. Reinstall the four screws to secure the LCD panel to the chassis.
Note: Make sure that no cables are under the chassis.
17. Position the computer main bracket over the LCD panel. Make sure the screw holes in the computer
main bracket align with those in the front bezel.
18. Reinstall all the 15 screws that secure the computer main bracket to the front bezel.
Figure 47. Reinstalling all the 15 screws that secure the computer main bracket to the front bezel
19. Reconnect the LCD panel cable and the touch panel control board cable to the system board. See
"Locating parts on the system board" on page 68.
.
Chapter 9 Replacing FRUs
105