Installing The Mounting Bracket - Electrolux E36WC45FSS Use & Care Manual Installation Instructions

14
Installation
INSTALL THE MOUNTING BRACKET
Ducted and Non-Ducted Hoods
1 Construct wood wall framing that is flush with interior surface of wall studs.
Make sure:
a the framing is centered over installation location.
b the height of the framing will allow the mounting bracket to be secured to the
2 After wall surface is installed, secure the mounting bracket to framing with (2)
4.8x38mm mounting screws. See chart below for mounting bracket location.
FRAMING
BEHIND WOOD CROSS
SUPPORT
WOOD CROSS SUPPORT
BEHIND DRYWALL
DRYWALL
Figure 7
CEILING
DUCT
HEIGHT METHOD 24"
DUCTED
37"
8-FEET
NON-DUCTED 37"
DUCTED OR
9-FEET
37"
NON-DUCTED
DUCTED OR
10-FEET
NON-DUCTED
WITH EXWC45S
NOTE : Minimum hood distance above cook top must not be less than 24". A maximum of 30" above
cook top is highly recommended for best capture of cooking impurities. Distances over 30" are at
the installer and user's discretion; and if ceiling height and flue lenght permit.
framing within the dimensions shown.
HOOD DISTANCE ABOVE 36" HIGH COOKTOP (SEE NOTE BELOW)
25" 26" 27" 28"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOKTOP
38" 39" 40" 41"
38" 39" 40"
38" 39" 40" 41"
39" 40" 41"
29" 30"
42" 43"
42" 43"