Technical Details; Electrical Connection - AEG CHDE 6260 Operating And Installation Instructions

Technical Details

Model:
Maximum absorbed power:
Fuse rating:
Motor absorption:
Lighting:
Duct diameter
Length of the cable:

Electrical connection

Safety warnings for the electrician
The electric outlet should be placed on the wall inside the chimney. The
hood has a power cable, 150 cm, with earth connection and the rated
voltage is 220 - 240 V (CHDE 6260/335D) - 230V (DE 6260 - DE 6250).
Connect the hood to the mains supply via a double pole switch
which has 3 mm minimum separation between the contacts.
The switch must be accessible at all times.
The following is valid in the United Kingdom only:
- the wire which is coloured green and yellow must be connected to
the terminal which is marked with the letter E or by the earth symbol
( ), or coloured green or green and yellow;
- the wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black, -
- the wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
CHDE 6260
DE 6260
DE 6250
330 W
T6A 250V
2 x 125 W
2 x 40 W
Ø 120 mm
150 cm
335D
230 W
T6A 250V
1 x 150 W
2 x 40 W
Ø 120 mm
150 cm
47