Casio CFX-9970G Manual page 4

8 - 2
View Window (V-Window) Settings
The nearby illustration shows the meaning
of each of these parameters.
3. To exit the View Window, press J or ! Q.
• Pressing w without inputting any value also exits the View Window.
• The following is the input range for View Window parameters.
• You can input parameter values up to 14 digits long. Values greater than 10
• The only keys that enabled while the View Window is on the display are: a
• The existing value remains unchanged if you input a value outside the
• Inputting a View Window range so the min value is greater than the max
• You can input expressions (such as 2 ) as View Window parameters.
• When the View Window setting does not allow display of the axes, the scale
• When View Window values are changed, the graph display is cleared and the
• View Window settings may cause irregular scale spacing.
• Setting maximum and minimum values that create too wide of a View
• The point of deflection sometimes exceeds the capabilities of the display with
• Setting maximum and minimum values that create to narrow of a View
–9.9999E+97 to 9.99999E+97
-2
or less than 10 , are automatically converted to a 7-digit mantissa (including
negative sign) plus a 2-digit exponent.
to j, ., E, -, f, c, d, e, +, -, *, /, (, ), ! 7,
J, ! Q. You can use - or - to input negative values.
allowable range or in the case of illegal input (negative sign only without a
value).
value, causes the axis to be inverted.
y
for the -axis is indicated on either the left or right edge of the display, while
x
that for the -axis is indicated on either the top or bottom edge.
newly set axes only are displayed.
Window range can result in a graph made up of disconnected lines (because
portions of the graph run off the screen), or in graphs that are inaccurate.
graphs that change drastically as they approach the point of deflection.
Window range can result in an error.
min
r
( , ) or
pitch
( X, Y )
max
7
114