Advanced Setup Parameters - Casio ALGEBRA FX 2.0 PLUS User Manual

• You can return the settings on the above setup screens (b through e) using the
procedure described under "To return setup parameters to their initial defaults".
6. After you create a setup, you can use the function key operations described below to start
sampling or perform other operations.
• 1(START) .... Starts sampling using the setup (page 4-5-1).
• 2(MULT) ...... Starts MULTIMETER Mode sampling using the setup (page 4-2-14).
• 3(MEM) ....... Saves the setup (page 4-3-1).
• 4(PRGM) ..... Converts the setup to a program (page 4-4-1).
u To return setup parameters to their initial defaults
Perform the following procedure when you want to return the parameters of the setup in the
current setup memory area to their initial defaults.
1. While the Advanced Setup menu is on the display, press g(Initialize).
2. In response to the confirmation message that appears, press w to initialize the setup.
• To clear the confirmation message without initializing the setup, press i.
u Advanced setup parameters
This section provides detailed information about the parameters you can change in step 5 of
the procedure under "To create an EA-100 setup using Advanced Setup" on page 4-2-4.
Channel
Selecting this parameter displays a screen where you can specify the EA-100 channel to be
used for sampling, the type of sensor used for each channel, and the storage location for
saving sample data.
4-2-5
EA-100 Setup
20011101 20010101