Remote Trigger; Installation; Warranty Card; Power Requirements - Cary Audio Design Cinema 2 Installation And User Manual

REMOTE TRIGGER:

This section describes the unpacking and installation procedures for your Cinema power
amplifier.
2.1 Unpacking
All shipping containers have been specially designed to protect their contents and special care has been
taken to prevent damage under normal shipping conditions. Mishandling should be evident upon
inspection of the shipping container. If shipping damage is found after visual inspection, take care not
to destroy the evidence. If necessary, document the damage with photographs and contact the
transport carrier immediately.
Carefully remove your new
signs of shipping damage. We strongly recommend saving all original packing cartons to protect your
amplifier from damage should you wish to store it or ship it for after-sales service.

2.2 Warranty Card

If you were the original purchaser of this unit and you purchased it in the United States, you should fill
out the enclosed warranty registration card and return it to Cary Audio Design within 15 days of your
purchase. Cary Audio Design also suggests that you keep your original packing cartons in case you ever
need to ship the unit when moving to a new home. Warranty restrictions apply. Consult the warranty
section of this manual for details. Please be certain to keep a copy of the original sales receipt from your
Authorized Cary Cinema dealer.
2.3 Cinema Amplifier Placement
Cinema
The power amplifier is designed for use inside climate controlled rooms. It must be protected
from the elements and temperature extremes. For example, avoid placing the unit in extremely hot
locations such as near radiators or other heating units. Avoid installation where it might be damp or
wet to avoid potential shock hazards.

2.4 Power Requirements

Cinema
The Amplifier is designed to operate from residential or commercial AC current mains. The
design voltage is 117 VAC at 50/60Hz (Foreign units 234 VAC at 50/60Hz).
2.5 Cables
The speaker cables from the output posts of the
convenient length, as your speaker set-up requires. Select speaker cables of sufficient size to preserve
the outstanding performance capabilities of your
for distances up to 10 feet, #12 for 25 feet. Most audio dealers will have proper speaker cable in stock
for this purpose. Consult your Authorized Cary Cinema dealer for advice.
1/8" connection jack. Set the front panel Main Power
switch to OFF to use the remote turn on/turn off feature
with the remote trigger controlled by an external switch.

INSTALLATION

Cinema
power amplifier from its packing carton and examine it closely for
Cinema
Cinema
Amplifier to the speaker system can be any
Amplifier. Heavy gauge #14 wire is suitable
5