Specifications; Damping Factor; Power Consumption - Cary Audio Design Cinema 2 Installation And User Manual

Cinema
Operating the
stability in virtually any home or commercial operating situation. Therefore, if the unit is operated
outside the parameters outlined in this Owner's Manual, damage may result.
1.1 Caution Terms
When the following cautionary terms are used in this manual, these definitions apply:
WARNING: Electrical hazard! Misuse or failure to follow instructions
properly
CAUTION: No risk or personal injury; however, misuse or failure to
follow
NOTE: No risk of personal injury or equipment damage. However,
misuse or
performance to the
This section describes the basic specifications of the Cary
printing. Specifications are subject to improvement without notice or obligation.
POWER OUTPUT:

DAMPING FACTOR:

PEAK CURRENT:
FREQUENCY RESPONSE:
DIMENSIONS:
INPUT POWER REQUIREMENTS: 100, 110, 117, 220, 240, / 50-60Hz

POWER CONSUMPTION:

NET WEIGHT:

SPECIFICATIONS

power amplifier is a simple procedure since each unit is designed for long term
may result in personal injury or death!
instructions may result in damage to
equipment.
failure to follow instructions may prevent proper
Class AB, 200 Watts/channel - 8 ohms
100 @ 8 ohms
50 @ 4 ohms
35 amps
10 to 50 kHz +/-0.1 dB
-3 dB @ 200 kHz
6.25"H x 17.7"W x 19.5"D – (6.25" x 17.7" x 12", Cinema 2)
Allow 2"D for binding post and front panel switch
2500/1500/1000 Watts –All channels, 8-ohm load, full power
38/48/80 lbs.
equipment.
Cinema
350 Watts/channel - 4 ohms
155/115/90 Watts – Idling with no signal input
3
Power Amplifiers at the time of