Introduction; Package Contents; Hardware Requirements - RME Audio TEB User Manual

Tdif expansion board for digi96/8 series, hammerfall series hdsp 9632 and hdsp 9652

Table of Contents

1. Introduction

Thank you for choosing the RME EXB technology. The TDIF Expansion Boards adds an 8-

channel TDIF interface to all ADAT-capable RME cards. Special features include manual

choice of clock reference, status LEDs and a word clock output.

Please ensure that all the following parts are included in the TEB's packaging box:

TDIF Expansion Board

2 Data cable 2-core

1 Cable adapter 5 ¼ " to 2 x 3,5"

Manual (PDF on RME Driver-CD)

TEBs can only be used with RME cards.

DIGI96 Series

TEBs use the internal ADAT interface of the DIGI cards. Therefore they do not work with the

DIGI96 (which did not support ADAT).

One TEB can be connected and operated.

Hammerfall Series

An operation with the Hammerfall or Hammerfall Light requires board revision 1.5 or higher,

because the internal connector ADAT1Out was not implemented in earlier versions.

One TEB can be connected and operated. Additionally one AEBx-O can be used simultane-

ously.

HDSP 9632

One TEB can be connected and operated.

HDSP 9652

Two TEBs can be connected and operated simultaneously. One TEB can be used together with

either one AEBx-I or AEBx-O.

Hammerfall DSP Multiface / Digiface

Multiface and Digiface use the Hammerfall DSP PCI card. This card has no internal inputs or

outputs. Therefore no Expansion Boards can be used.

User's Guide TEB

Table of Contents