1. Introduction
The WCM (Word Clock Module) adds a word clock input and output in professional quality to
any card of the DIGI96* series. A low jitter optimized PLL circuit, an integrated clock gen-
erator, and a unique test mode extend the powerful capabilities of our digital audio cards, in a
way many professional users have asked for.
2. Package Contents
Please ensure that all the following parts are included in the WCM's packaging box:
Slot card WCM MKII
4 internal cables (3 core)
1 BNC T-adapter
Quick Info guide
RME Driver CD
Note: The WCM needs no drivers and no additional software installation!
3. System requirements
One free slot in the PC's housing
At least one, not more than three DIGI96 series cards*
4. Power supply
The WCM gets its power from the DIGI96 series via the supplied cables.
*DIGI96 and 96/8 revision 1.2 or lower have no connectors for the WCM (ST6 and ST7).
5. Brief Description and Characteristics
The Word Clock Module WCM is a small companion board to RME's DIGI96 series, and
needs no slot on the motherboard. It adds a word clock input and output to these powerful digi-
tal interface cards. Both connectors are BNC jacks, so there's no hassle with adapters. The
module includes an optimized low jitter PLL for reliable reconstruction of the audio clock signal,
a low impedance output, and a complete word clock generator, usable as master clock or for
test and check purposes.
The WCM is connected to the DIGIs using two supplied cables. After connection it is imme-
diately ready to operate. The drivers of the DIGI96 series are already prepared for an opera-
tion with the WCM.
Thanks to several LEDs (power, test mode, LOCK) and the highly integrated concept of instal-
lation, first operation and usage are simple even for the unexperienced user.
User's Guide WCM MKII © RME
3