Fig. 3 - - T6- -NRH- -A Carton Contents
1. Display Module
2. Stand- -off for Equipment Control Module
3. Outside Air Temperature Sensor, screws and pigtail.
4. Equipment Control Module
Thermidistat Control Location
Thermidistat Control should be mounted:
Approximately 5 ft (1.5m) from floor.
S
Close to or in a frequently used room, preferably on an inside parti-
S
tioning wall.
On a section of wall without pipes or duct work.
S
Thermidistat Control should NOT be mounted:
Close to a window, on an outside wall, or next to a door leading to the
S
outside.
9
A07753