6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the two plastic tabs on the hinge cover align with the corresponding holes in the computer.
Figure 7. Reinstalling the system stand hinge cover
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 8. Reinstalling the screw to secure the system stand hinge cover to the computer
Removing and reinstalling the system stand
Attention:
Do not open your computer or attempt any repair before reading and understanding the "Important safety information"
on page v.
This section provides instructions on how to remove and reinstall the system stand.
To remove and reinstall the system stand, do the following:
.
Chapter 5
Installing or replacing hardware
29