Obtaining Device Drivers - Lenovo ThinkCentre Edge 72z User Manual

Connect the USB dongle to an available USB connector
on the computer.
Figure 19. Connecting the USB dongle to an USB
connector
Close the battery compartment cover and slide it forward
until it clicks into place.
Figure 21. Closing the battery compartment cover
Notes:
• The green LED indicates that the mouse is ready for use.
• The flashing amber LED indicates a low battery power level.
• Push the power switch to the off position when you are not using the mouse. This extends the battery life.
• Disconnect the USB dongle from your computer and store it in the wireless mouse compartment or in
the wireless keyboard compartment.

Obtaining device drivers

You can obtain device drivers for operating systems that are not preinstalled at
http://www.lenovo.com/support. Installation instructions are provided in readme files with the device-driver
files.
Insert two AA batteries into the mouse compartment
according to the polarity indicators.
Figure 20. Installing the mouse batteries
Push the power switch to the on position and the LED
(light-emitting diode) is on.
Figure 22. Pushing the power switch on
.
Chapter 5 Installing or replacing hardware
35