System Example - Alpine DVA-5210 Owner's Manual

System Example

Precautions when Making System Upgrades
• After connections are completed, it will be necessary to change the system settings of the DVA-5210. Before installing the
product, please see "Setting the System Switch" on page 32 and "Setting the Ai-NET" on page 21.
• When connecting the DVA-5210 to a head unit or Ai-NET compatible AV head unit, do not connect the switched (ignition) power
lead.
• When connecting the DVA-5210 to an Alpine TV monitor and Ai-NET compatible AV head unit together, the remote control input
cable (white/brown) of both units must be connected. Failing to do so will result in a loss of remote control operation. When
making connections to another brand of TV monitor, please use the optional remote control sensor unit.
Connecting a non Ai-NET compatible Head Unit, Digital Audio Processor (PXA-H700, PXA-H900, etc.)
and TV Monitor
DVD Player
DVA-5210
Video Output
Connector
Audio Output
Connector
Remote Control Input Lead
(White/Brown)
• If using in a system with a head unit that is not fully Ai-NET compatible (no processor control) and a digital audio processor, do not connect
the head unit's Ai-NET cable. Only connect the DVA-5210 and digital audio processor using an optical fiber cable and its own Ai-NET cable.
Use the head unit's analog output (Front or rear) connected to the analog input of the processor.
• When connecting only to a digital audio processor (with a non-Alpine head unit or Alpine head unit without Ai-NET), it is possible to use both
an optical fiber cable and an Ai-NET output cable.
• When connecting another brand of TV monitor, there is no need to connect the remote control input cord (white/brown). Use the optional
remote control sensor unit.
• Be sure to connect the switched (ignition) power lead.
• Also refer to the operating instructions of the other products in the system.
Please observe the following when using Fiber Optic Cable.
• Do not coil the Fiber Optic Cable smaller than a 30 mm radius.
• Do not place anything on top of the Fiber Optic Cable.
System Switch
1
2
Digital Output
Terminal (Optical)
Fiber Optic Cable
Head Unit non -compatible
Ai-NET (Sold Separately)
Remote Turn-On Lead (Blue/White)
RCA Extension Cable
AUX Video Input
Terminal (AUX1)
Only when connecting with rear monitor
RCA Extension Cable
Remote Control Output Lead (AUX1)
(White/Brown)
Digital Input
Terminal (Optical)
(for DVD Player)
RCA Extension Cable
Remote Turn-On Lead (Blue/White)
AV-Interface Unit
TME-M790, etc.
(Sold Separately)
AUX Audio Input
Terminal (AUX1)
Setting of DVA-5210
The DVA-5210's system settings must be made after
connections are completed. Before fixing the unit in place, refer
to "Setting the System Switch" on page 32 and "Setting the Ai-
NET" on page 21.
Setting Item
System switch
Ai-NET setting
Digital Audio Processor
PXA-H700, etc.
(Sold Separately)
Monitor
TME-M790, etc.
(Sold Separately)
Setting
2 (STANDALONE)
-
33
-EN