Replacing The Light Bulb - AEG SANTO Refrigerator/Freezer Operating Instructions Manual

Maintenance and Cleaning
1
Caution: Do not allow the stainless steel cleaner to come into contact
with plastic parts, e.g. the end caps on the doors, as it will damage
them.
2
Accumulation of dust at the condenser increases energy consumption.
For this reason carefully clean the condenser at the back of the
appliance once a year with a soft brush or a vacuum cleaner.
3. After everything is dry place appliance back into service.

Replacing the light bulb

3
For safety reasons the interior lighting switches off after 7 minutes
when the door is open. It switches on again the next time the door is
opened.
1
Warning! Danger of electrical shock! Before replacing the light bulb
switch off the appliance and remove the mains plug.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14
0
1. To switch the appliance off press and hold both ON/OFF buttons until
the mains power lights go off.
2. Unplug the mains plug.
3. To change the light bulb, undo the
cross head screw and remove the
light bulb cover downwards.
4. Change the defective light bulb.
5. Refit the light bulb cover and the
cross head screw.
38
818 33 14-00/7