Brinkmann ProSeries 2415 Owner's Manual page 29

Side
Burner
Valve
Valve
Nozzle
Figure 1
Side Burner
Grate
Burner Venturi
Figure 2
Bezel
Step 14
Firmly seat the valve nozzle into the
burner venturi. Hold in place while
you perform Step 15.
Step 15
Insert the two screws that are
already attached on the side burner
valve through the corresponding
key holes on the side burner front
panel and bezel, from the back of
the side burner front panel.
Depending on the side burner
valve, you will be using either the
outside key holes (Figure 1), or the
inside key holes (Figure 2). Pull the
valve downward or upward to lock
into place. Then tighten the two
screws.
Step 16
Side
Burner
Install the side burner control knob
Control
onto valve stem. Place the side
Knob
burner grate onto the side burner
table.
28