Taking Pictures With Zoom; Using The Zoom By Performing Touch Operations; Zoom Types And Use; Vqt3H08 - Panasonic Lumix DMC-TZ20 Operating Instructions Manual

Hide thumbs Also See for Lumix DMC-TZ20:
Table of Contents

Advertisement

Taking pictures with zoom

Recording Mode:
You can zoom in up to 16 times with "Optical Zoom", and up to 33.8 times with "Extra
Optical Zoom" (pictures only) with lower picture quality. To zoom further, you can use
[i.ZOOM] or [Digital Zoom].
Zoom In/Out
Capture a
Enlarge
wider area
the subject
(wide-angle)
(telephoto)
• The zoom speed can be set to one of 2 levels using the angle at which the zoom
lever is turned. ∗
1

Using the zoom by performing touch operations

Touch
The zoom lever appears on the screen.
Touch the T or W edge of the zoom lever on the screen
Slow zooming
The zoom speed does not change during motion picture recording.
1
When
or
is touched again while zooming, zooming will stop.
2
Adjust the focus after adjusting the zoom.
Do not touch the lens barrel during zooming.
The zoom ratio and the zoom bar displayed on the screen are estimates.
The camera may make a rattling noise and vibrate when the zoom lever is operated -
this is not a fault.
50

VQT3H08

Focus range
Zoom ratio
Zoom bar
Fast zooming all the way to the T end ∗
Fast zooming ∗
1
Fast zooming all the way to the W end ∗
The zoom ratio changes when the number of recording pixels is changed.
Optical Zoom
Zooming in up to 16 times is possible if pictures without
[Picture Size] on the [Rec] menu. (→85)
Extra Optical Zoom
Zooming in up to 33.8 times is possible when pictures with
[Picture Size] on the [Rec] menu (→85). EZ is short for "Extra Optical Zoom."
Extra Optical Zoom cannot be used in the following cases:
• [Intelligent Auto] Mode (when [Motion Deblur] is [ON])
• [Macro Zoom]
• [Transform], [High Sens.], [Flash Burst], [Pin Hole], [Photo Frame] and [High Speed
Movie] Scene Modes
To increase the zoom ratio further, the following zoom can be used in combination.
i.Zoom
The camera uses super resolution technology to increase the zoom ratio. Using super
resolution technology, the zoom ratio can be increased up to about 1.3 times higher
than the original zoom ratio with almost no deterioration of picture quality. (→92)
When [i.Resolution] is set to [i.ZOOM], super resolution technology is applied to the
picture.
1,
2
The i.Zoom functions in the following cases.
• [Intelligent Auto] Mode (except when [Motion Deblur] is [ON])
• Scene Modes (except for [Handheld Night Shot], [High Sens.], [Flash Burst], [Pin
Hole])
The [i.ZOOM] does not function when [Burst] is set (when
Digital Zoom
1,
2
Zoom 4 times further than Optical/Extra Optical Zoom. Note that, with Digital Zoom,
enlarging will decrease picture quality. Set the [Digital Zoom] in the [Rec] menu to [ON].
(→92)
Digital Zoom cannot be used in the following modes:
• [Intelligent Auto] Mode
• Scene Modes ([Transform], [Handheld Night Shot], [High Sens.], [Flash Burst], [Pin
Hole], [Film Grain], [Photo Frame] and [High Speed Movie])

Zoom types and use

• Motion picture
• When the [Burst] setting is set to
• When the [Burst] setting is set to
have been selected by
have been selected by
or
or
is set).
or
51
VQT3H08

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lumix dmc-zs10

Table of Contents