Navman F10 User Manual page 72

F10
Your computer will connect to the Internet and activate your Map Product Key.
When activation has completed, the map will change colour to amber; continue to step 7.
7.
Click the map you want to install to your Navman.
The map will change colour to
To deselect a map, click the map again.
Note: You may need to install multiple maps to cover the required geographical area.
8.
Complete the following:
If you want to ...
select an yellow map
select a red map
install the selected maps to your Navman
9.
Select the destination media for the selected maps, then click Transfer Now.
The selected maps will be installed and change colour to green.
10. To use your Navman, disconnect the USB cable.
WARNING Do not disconnect the USB cable from the Navman USB Socket until the installed map or maps have
changed colour to
72
yellow to indicate it has been selected.
Then ...
go back to step 7.
the map needs to be activated via the Internet before it can be installed;
go back to step 5.
continue to step 9.
green.