Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 2809i Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Silks
Express
Automatic
Shirts
Denim
Outerwear
Dark garments
Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.

To omit the final spin (Rinse hold)

^ Select the
rpm
speed button. The laundry will not be
1400
spun and will remain suspended in
1200
the final rinse water. This reduces
600
creasing if the laundry is not going to
1200
be removed from the drum immedi-
400
ately after the end of the programme.
1400
– To start the final spin:
1200
600
The washing machine will display the
maximum spin speed possible. You
900
can select a spin speed lower than
800
this. Start the final spin by pressing
1200
the Start/Stop button.
1400
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No
^ Select the No
Spin speed button. The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cottons, Minimum iron, Express and
Automatic programmes.

Spinning

setting using the Spin
)
setting using the
19