Building Under A Continous Worktop / In A Kitchen Run - Miele W 2809i Operating Instructions Manual

Installation and connection
Building under a continous
worktop / in a kitchen run
N = Niche height (820 - 930 mm)
This machine is specially designed for
installation under a continuous worktop
run in a fitted kitchen.
It is supplied with a cover plate,
instead of a lid, which is necessary
to ensure electrical safety and must
not be removed.
The washing machine must not be
used without the front panel in
place.
50
– The slides* can be used to protect
the floor from damage when the
machine is pushed into position or
taken out for servicing.
– Connections for electricity, water and
drainage should be installed in such
a way that they remain accessible
when the machine is in place.
With niche heights of:
Niche height
(mm)
820
from 830 - 840 Fit longer screw feet*
from 870 -885
from 915 -930
* accessory available to order
If the kitchen run has a continuous
furniture plinth in place, a gap must
be made for the washing machine.
Accessory
None required
(Set to approx.
40 mm)
Use one raising kit*
Use two raising kits*