6 ] Final Operation Check - Brother PT-MT (P-touch mini ' tech Service Manual

[ 6 ] Final Operation Check
After reassembling, do the following:
(1) Load dry cells.
(2) Press the ON/OFF key.
(3) Turn the select dial to the desired position and press the Enter key. The selected
symbol should be established.
(4) Press the Print key. The selected item should be printed out.
(5) Push the cutter lever. The cutter lever should work smoothly and cut off the tape.
(6) Check that the printout is not faint.
(7) Open the cassette cover and remove the tape cassette and dry cells.
The above final operation check should be usually made. For your reference, the
inspection mode is described in [ 7 ].
III - 18